Learn How to Print Using a 3D Printer

Regardless of the brand of 3D printer you have, this type of technology has its own perks and quirks. Don’t trust every 3d print review because you don’t need the most expensive machine you can have to obtain the best 3D object for your project. This is especially true if you’re just starting to learn how to print in 3D.

3D PrinterBefore you get started, you must make sure that the temperature is right and the level of the print bed is even. This is to encourage proper or successful 3D prints. Keep in mind that a slight tilt can already cause gaps between the nozzle and the bed. You should make sure that the nozzle isn’t too far from the printer bed to avoid bad sticking. Extruder jams can be prevented when the nozzle isn’t too close to the bed. To be sure, read your manufacturer’s instructions on how to properly print and produce 3D objects.

Another thing to keep in mind when using a 3D printer is to properly set the Z-gap, which is a space between the head and the bed. If it’s too low, there won’t be enough space for molten plastic to come out. However, if the space is too high, the plastic might not stick to the printer bed properly. Thus, it’s always a good idea to follow the instructions of your 3D printer’s manufacturer. You’ll find the proper ways to set the Z-gap in order to product perfect 3D objects.

You should also watch the first layers produced. If the first few layers are successful, then it’s most likely that the remainder of the print will also work.